How to Set Up Standing Seam Steel Roof Panels

Today we will install an American Structure Parts' SL-16 ® metal roof panel. These instructions specifically concentrate on metal panel installment. For more information concerning eave trim and cleat installment, view our other how-to video clips.

 

Galvanized Steel Roofing

 

We advise making use of a diamond blade that's identified as a ferrous-metal-cutting blade, but several tradespeople use a normal masonry diamond blade with great outcomes. When accessibility is limited, or you require to make a flush cut, an oscillating tool fitted with a metal-cutting blade will solve the problem.

 

How do you cut metal with an angle grinder?

 

A hacksaw is a versatile type of saw useful for cutting a variety of materials for projects around the home. One of the benefits of owning a hacksaw is that one blade can successfully cut metal, plastic and wood. Other types of saws are more specifically geared toward cutting a single type of material.

 

  • Making accurate cuts on light weight aluminum poles, angles and tubes is easy with a miter saw and a blade designed to cut nonferrous steel (check the label).
  • If you want a sharp 90 ° bend, faucet along the crease with a club.
  • Right-hand tin snips are used for cutting tin where the waste tin will certainly get on the best side of the cutting line.
  • Do this by sliding the hemming tool over and flexing under one inch.

 

Press the base plate of your saw against a side where https://donovanysjx302.shutterfly.com/24 you wish to begin reducing. Brace the metal by applying stress with your nondominant hand, holding it at the very least 2 feet (0.61 m) away from your saw.

 

Cut Steel Roofing With Electric Shears

 

Any kind of continual or sharp-toothed blade that is made use of for metal cutting will certainly work. Put your corrugated metal on top of your job surface to check here ensure that there isn't anything obstructing your saw blade straight below your reducing line. While the blade guard will certainly safeguard you from Additional hints the majority of the triggers, you'll want to wear handwear covers and welding mask for the highest degree of security.

 

Reducing.

 

Right-hand tin snips are used for cutting tin where the waste tin will get on the right side of the reducing line. Right-handed tin snips are required if you are reducing a contour that runs counterclockwise. Left-hand tin snips are made use of when the waste will certainly be on the left side of the cut line. These are the snips to make use of if you're reducing a contour that runs clockwise.